AUTO REVERSE-TAPPING & CORE DRILL MACHINE
FULLY MECHANICAL Tapping with automatic reversing controlled by crank motion. No electronics! Two-mode gearbox: one mode for auto-reverse tapping and one mode for annular cutters and twist drills. Quick-release spindle for fast, tool-free switching of accessories.
  
| Model |
TP2000 |
| Power input |
1100W |
| Voltage: |
230V / 50Hz , 110V / 60Hz |
| Drilling Mode No / Full Load r.p.m. |
550 / 330 |
| Tapping Mode No / Full Load r.p.m. |
150 / 90 |
| Annular Cutter Arbor |
Set Screw Type, 19mm Weldon Shank |
| Annular Cutters |
Dia. 35mm (1-3/8 in.) |
| Taps |
20mm (13/16 in.) |
| Twist Drills |
13mm ( 1/2 in.) |
| Total Stroke |
150mm (6 in.) |
| Magnetic Ashesion |
15,000 N ( 3,372 lb-f ) |
| Net Weight |
13.7 Kgs (30.8 Lbs) |
STANDARD ACCESSORIES:
* 5 Tap Collet Arbors in sizes: M12, M14, M16, M18 & M20 (DIN 376 )
* Annular Cutter Arbor 3/4" (19mm)Weldon Shank
* 2.5mm L-hex key
* 4mm L-hex key
* Coolant Tank Kit
* Safety Chain * 1/2"; Chuck and chuck key
OPTIONAL ACCESSORIES:
* Other sizes of Tap Collet Arbors
|
