WET+DRY DIAMOND CORE DRILL
The DM80 is an extremely versatile and useful hand-held diamond core drill. It is very easy to handle since it weighs only 3.8kg. Whether one needs to wet drill hard concrete or dry drill brick, the same machine can be quickly and easily converted to do the job. Drilling is made easier with the soft impact function. The 2 speed gearbox plus the speed control thumb wheel allows a varietly of bit sizes and materials to be drilled. The feedback electronic speed stabilization allows the speed to remain the same, regardless of load. For protection, there is a mechanical safety clutch. The motor has soft start and overload protection.
Can drill at any angle from 0 to 45 degrees.
Optional dry drilling vacuum collar with bayonet hose connector for through-the-spindle dust collection.
Wet Drilling Set-Up (Optional)
Optional water feed collar with valve and quick-release hose coupling
Quick-release Adaptor & Chuck (Optional)
Quick-Release adaptor for fast,
tool-free switching of diamond core cutter.
Long Extension Arbor (Optional)
he long extension arbor is useful for drilling in hard to reach areas and also with short core bits. Precision machined for concentricity.
Vacuum Collector Pad (Optional)
This device adheres to the wall by vacuum cleaner suction and very effectively collects the dust or water right at thesource. Various rings are available for different core sizes. The ring set includes 45, 55, 65 and 75mm. By removing the ring, up to 130mm is possible.
Optional Rigs for DM160, DM100, DM80
Quick release cradle accept Clamp bracket neck diameter 60mm , 68mm & 43mm.
   
| Model |
DM80 |
DM80N |
| Power input |
1700W |
1200W |
| Voltage |
230V/50Hz, 110V/60Hz |
| No Load r.p.m Low Range Gear |
500~1500 |
| No Load r.p.m High Range Gear |
700~2300 |
| Gearbox |
2 Speed |
| Capacity (Brick) |
80mm |
160mm |
| Capacity (Concrete) |
80mm |
| Spindle |
M18 or M16 |
| Switchable Soft Impact |
With |
| Soft Start & Overload Protection |
With |
| Mechanical Safety Clutch |
With |
| Feedback Electronic speed control |
With |
Without |
| Neck Diameter |
43mm |
| Net Weight |
3.8 Kgs (8.36Lbs) |
STANDARD ACCESSORIES:
* Wrench M19/21
* Side handle
OPTIONAL ACCESSORIES:
* Water feed collar w/ valve & coupling
* Dry vacuum collar w/ bayonet connector
* Vacuum collector pad
* Long Extension Arbor
|
